manualshive.com logo in svg

Vaisala HPP272, User Manual, Page: 30 / 66

Share
Download
Vaisala HPP272 User Manual Download Page 30

6. Vaisala Insight Software

Vaisala Insight software is a configuration software for Indigo-compatible probes. The

supported operating systems are Windows 7 (64-bit), Windows 8.1 (64-bit), and Windows 10
(64-bit).

With the Insight software, you can:

• See device information and status.
• See real-time measurement.
• Configure serial communication settings, purge settings, filtering factor, and analog

output parameters and scaling.

• Calibrate and adjust the device.

Download Vaisala Insight software at 

www.vaisala.com/insight

.

The probe can be connected to Vaisala Insight software using a Vaisala USB cable (no.
242659).

6.1 Connecting to Insight Software

• Computer with Insight software installed
• USB connection cable (no. 242659)

Figure 10 Connecting Probe to Insight

1. Open the Vaisala Insight software.

2. Connect the USB cable to a free USB port on the PC.
3. Connect the probe to the USB cable.

4. Wait for the Insight software to recognize and identify the probe.

HPP272 User Guide

M211972EN-B

28

Summary of Contents for HPP272



































































Reviews:

No comments