Vaisala HMP80 Series, User Manual, Page: 22 / 54

1
2
Figure 8 Example installation
1 Mount the probe head horizontally to prevent any water condensing on the probe head
from running to the sensors
2 Attach Indigo80 to a metallic surface using the optional magnetic hanger accessory
(Vaisala item code ASM214318SP).
5.3.1 Configuring environmental compensations
After installation, configure the pressure compensation setting, if relevant to your probe and
its measurement environment.
For example, when you have installed the probe in a process with a pressure differing from
normal atmospheric pressure, update the correct pressure into the pressure compensation
setpoint parameter or register of the probe. This allows the probe to apply the appropriate
pressure compensation into its measurement results.
You can configure the setting with the Insight software or the Indigo80 handheld indicator.
5.4 Configuring probe features with Indigo80
handheld indicator
• Probe connection cable
You can use the Indigo80 handheld indicator to configure probe features such as
compensation setpoints, sensor purge settings, and filtering factor. The available features
depend on the probe model and firmware version.
HMP80 Series User Guide M212903EN-A
22