manualshive.com logo in svg

Vaisala HMP3, User Manual, Page: 29 / 96

Share
Download
Vaisala HMP3 User Manual Download Page 29

4. Configuration with Insight software

4.1 Vaisala Insight software

Vaisala Insight software is a configuration software for Indigo-compatible devices. With the
Insight software, you can:

• See probe information and status
• See real-time measurement
• Record data up to 48 hours and export in CSV format
• Calibrate and adjust the probe
• Configure probe features such as measurement filtering, chemical purge, heating, and

serial communication

Microsoft Windows

â

 operating system and Vaisala USB cable (no. 242659) required.

Download Vaisala Insight software at 

www.vaisala.com/insight

.

4.2 Installing driver for the USB service cable

Only Windows

â

 operating systems are supported by the driver of the USB

service cable.

1. Connect the USB service cable to a USB port on your computer. Windows

â

 detects the

new device and installs the appropriate driver.

2. Open 

Devices and Printers

 from the Windows

â

 Start menu. Use search to find it if

necessary (search for "devices").

Chapter 4 – Configuration with Insight software

27

陕西威瑞仪器仪表有限公司 生产代理销售：实验检测设备 气象科学仪器设备

Tel:029-88186182 Web:www.xavery.cn Email:[email protected]

Summary of Contents for HMP3

































































































Reviews:

No comments