Vaisala Drycap DMT152, User Manual

Page: 33 / 72

6. You may need to adjust the Local echo setting in the Terminal category to see what you
are typing on the serial line. To access the configuration screen while a session is running,
click the right mouse button over the session window, and select
Change Settings... from
the pop-up menu.
5.1.3 List of Serial Commands
All commands can be issued either in uppercase or lowercase. In the command examples, the
keyboard input by the user is in bold type.
The notation <cr> refers to pressing the carriage return key (the Enter key) on your computer
keyboard. Enter a <cr> to clear the command buffer before starting to enter commands.
Note that the term quantity in the serial interface corresponds to measurement parameter .
Table 8 List of Serial Commands
Command Description
?
Show device information
?? Show device information (overrides POLL mode)
ACAL [1/2]
Calibrate analog channel
ADDR [0 ... 99]
Set the transmitter address for
POLL
mode
AERR
Set analog output device malfunction error mode
ALARM
Set analog output limit alarm modes
Chapter 5 – Serial Line Operation
31