Chapter 4 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 81
PSTAB
Use the
PSTAB command
to display or set pressure stability limits.
Adding a PSTAB element to the FORM string enables checking the
stability using the serial port.
User Port Serial Settings
Using Serial Line
Use the serial line command
SERI [b p d s]
to set communication
settings for the user port.
SERI [b p d s]
Example:
>seri
Baud P D S : 9600 N 8 1
>
You need to reset the barometer to activate the new communication
settings set with the
SERI
command.
The settings can be changed one parameter at a time or all parameters
at once:
>seri 0
Baud P D S : 9600 N 8 1
>seri o
Baud P D S : 9600 O 8 1
>
where
b
=
Bit rate (110, 150, 300, 600, 1200, 2400, 4800, 9600,19200,
38400, 57600, 115200)
p
=
Parity (n = none, e = even, o = odd)
d
=
Data bits (7 or 8)
s
=
Stop bits (1 or 2)
