manualshive.com logo in svg

Vaisala AWS310-SITE, Configuration And Maintenance Manual

Share
Download
Vaisala AWS310-SITE Configuration And Maintenance Manual Download Page 39

4.4.4 Setting Time Manually

If you use AviMet time synchronization, AWS Client receives the time from AviMet and
overwrites the time setting. You must still set the time zone manually.

Time zone information is needed for certain daily calculations to function correctly. It is
used, for example, to sample the daily minimum and maximum temperatures at correct
time.

1. In AWS Client, select 

Maintenance > Synchronize Clock

.

2. In the 

Set Logger Time

 window, in 

Set Date & Time

, set the system time. 

Use PC time

Synchronize the QML data logger time with your computer time.

Set time

Set the time manually.

3. In 

Set Time Zone

, set the time zone. 

Use PC time zone

Use the time zone in your computer.

Set time zone

Set the time zone manually.

4.

New Logger Time

 displays the time set for the QML data logger. Check that the time is

correct.

5. To save the changes, select 

Set Time

.

Chapter 4 – AWS Client Usage

37

Summary of Contents for AWS310-SITE

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands