Vaisala AviMet WID511 User Manual Download

Page: 88 / 102

8.3 LED indicators

If the front cover has been removed, the following LED indicators can be seen during device
power

‑

up. When the application starts, the LEDs turn off automatically.

Figure 24 LED indicators (during power-up) behind front cover

Red LED: Heartbeat, blinks when the operating system is running

Yellow LED: Flash memory activity

The LED indicators for the Ethernet connection are located behind the back cover.

Table 9 Ethernet connection LED indicator

LED

Description

Yellow (LINK/ACT)

Ethernet cable is not connected.

Blinking yellow (LINK/ACT)

Link OK, data is being transferred.

Green (SPEED)

Lit when the connection is 10 Mbit/s.

Not lit when the connection is 100 Mbit/s.

WID511 User Guide

M211109EN-L

Summary of Contents for AviMet WID511







































































































Search results

Summary of Contents for AviMet WID511

Reviews:

Related manuals for AviMet WID511

Brands by name

Popular brands

Vaisala AviMet WID511, User Manual

Search results

Summary of Contents for AviMet WID511

Reviews:

Related manuals for AviMet WID511

Brands by name

Popular brands