17
VAIO Operating and installation instructions
On each side section, screw 4 countersunk
head screws into the pre-mounted dowels.
Turn the screws until you can no longer see
the thread.
Each of the side sections has surface tre-
atment on the inside of one long side. So
there is a left (L) and a right (R) side secti-
on. Sealing strips are attached to the un-
dersides of these sections (see arrows) and
must point downwards at a later stage.
There are six recesses on the underside of
the top plate which indicate the rear and
the front (see illustration).
Carefully lift the left side section onto the
wood-burning stove.
Make sure that the element is
parallel to the stove.
7
8
9
Preparing the side cladding
Side sections and top plate explanations
front
behind
Mounting the left side section
* Note: The part with the surface treatment should always point forwards.
(R)
(L)
