11
ecoTEC exclusive installation and maintenance instructions / 0020017768_02
4.5 Mounting
the
appliance
85
50
240
75
75
23
50
3
1
2
Fig. 4.4 Mounting the appliance
• Fix the hanging bracket (
1
) to the wall using the plugs
and screws (
2
) provided with the appliance.
• Hang the top of the appliance (
3
) onto the hanging
bracket using the suspension bracket.
4.6
Removing the front case
1
2
Fig. 4.5 Removing the front case
To disassemble the front housing of the appliance, pro-
ceed as follows:
• Release the screw (
1
) on the bottom of the appliance.
• Push both the clamps (
2
) on the bottom of the appli-
ance together so that the front cladding releases.
• Pull the housing forwards at the lower edge and re-
move the front cladding upwards.
5 Installation
d
Danger!
The Vaillant ecoTEC exclusive may only be in-
stalled by a suitably qualified heating engineer
who also assumes the responsibility for install-
ing the appliance properly and fully commis-
sioning the appliance prior to first use, along
with demonstrating its correct use to the end
user.
5.1
General instructions for heating system
a
Caution!
Flush the heating system thoroughly before
connecting the appliance!
By doing that, residue such as welds, cinder,
hemp, putty, rust, rough dust and similar sub-
stances are removed from the pipes. Otherwise
such substances can be deposited in the appli-
ance and cause damage.
Assembly 4
Installation 5