Notes on the documentation 2
0020100571_03 auroTHERM, auroTHERM plus Installation manual
7
2
Notes on the documentation
2.1
Observing other applicable documents
▶
You must observe all the operating and installation in-
structions included with the system components.
2.2
Storing documents
Document handover
▶
Pass this installation manual and all other applicable
documents and, if necessary, any required tools to the
system operator.
Availability of documents
The system operator is responsible for storing the docu-
ments so that they are available whenever required.
2.3
Applicability of the instructions
These instructions apply for the following only:
Collector types and article numbers
VFK 145/2 H
0010004457, 0010008899
VFK 145/2 V
0010004455, 0010008898
VFK 155 H
0010013174
VFK 155 V
0010013173
2.4
Name
In this manual, flat collectors are referred to as collectors.
3
Description of the unit
3.1
Type overview
–
VFK 145/2 H
–
VFK 155 H
–
VFK 145/2 V
–
VFK 155 V
3.2
Information on the identification plate
Information on the identific-
ation plate
Meaning
CE label:
The collectors comply with
the relevant product-specific
European guidelines.
Solar Keymark:
The collectors have been
successfully tested according
to the rules and requirements
for the Solar Keymark.
CSTBat
CSTBat
CSTBat
VFK 155 H and VFK 155 V
only:
CSTBat:
The collectors have been
successfully tested according
to the rules and requirements
for the CSTBat.
Read the installation manual.
Information on the identific-
ation plate
Meaning
VFK 145/2 H
VFK 145/2 V
VFK 155 H
VFK 155 V
Type designation
VFK
Vaillant flat collector
145 (155)
Collector output
/2
Unit generation
H
Horizontal design
V
Vertical design
Flat plate collector
Flat collector
A
G
Gross area
V
F
Liquid volume
m
Weight
A
Dimensions
Q
max
Max. output
tstgf
Stagnation temperature
Pmax
Max. permissible operating
pressure
Serial-No.
Bar code with serial number,
The 7th to 16th digits of the
serial number form the article
number
3.3
Purpose of the unit
The collectors are used for solar heating support as well as
for solar-supported hot water generation.
4
On-roof fitting and installation
▶
When fitting and installing the collectors, you must ob-
serve the chapter "Safety".
4.1
Preparing for fitting and installation
4.1.1
Delivery, transport and positioning
4.1.1.1 Storing collectors
▶
To prevent moisture from penetrating into the collector,
always store the collectors dry and in a weatherproof
area.
