Vaillant 0010023193, Operating And Installation Instructions

Page: 6 / 14

For the operator 2
0020255239_00 Operating and installation instructions
5
2 For the operator
2.1 Notes on the documentation
2.1.1 Observing other applicable documents
▶
You must observe all operating instructions enclosed with
the system components.
2.1.2 Storing documents
▶
Keep this manual and all other applicable documents
safe for future use.
2.1.3 Validity of the instructions
These instructions apply only to:
Product article number
VEI 300/1 MW 0010023193
VEI 500/1 MW 0010023194
VEI 700/1 MW 0010023195
VEI 800/1 MW 0010023196
VEI 1000/1 MW 0010023197
2.2 Product description
The product is an infrared radiant heater that heats objects
using infrared waves. These warm objects then transfer heat
to their surroundings.
The product is equipped with a safety cut-out that switches
the product off in the event of overheating and switches it
back on automatically once the product has cooled down.
The product should be used in combination with the following
components:
–
VRT 260f radio control
–
Radio receiver
–
VR 44 radio receiver, exposed
–
VR 45 radio receiver, concealed
–
VR 46 remote control socket receiver
–
VR 48 window-opening detector
The product can be mounted on the wall or ceiling.
Maximum surface temperature at an environmental temper-
ature of 20 °C: 110 °C (115 °C when mounted on the ceil-
ing).
2.2.1 Product design
1 2 3
1 Infrared radiant heater
2 Wall bracket
3 Earthed plug
2.2.2 Data plate
The data plate is located on the back panel of the product.
Information on the
data plate Meaning
Read the instructions.
VEI Infrared radiant heater
300 / 500 / 700 / 800
/ 1000 320 / 500 / 650 / 800 / 1000 W nom-
inal heat output (230 V power sup-
ply)
/1 Product generation
MW Surface material and surface colour
(front)
–
M = Metal
–
W = White
1~N PE 230 V Voltage (V)
Serial number for identification; 7th to 16th digits =
product article number
2.2.3 CE label
The CE label shows that the products comply with the basic
requirements of the applicable directives as stated on the
identification plate.
The declaration of conformity can be viewed at the manufac-
turer's site.