COMMISSIONING
54
5.3.3
End segment with feed terminal (fixpoint)
Step 1
Prerequisites:
Clean and tidy workplace.
Required tools:
⚒
¼" reversible ratchet SW 7
Assembly instructions:
1. Mount the transfer guide to the carrier using the
included screws with a tightening torque of 3 Nm.
Step 2
Required tools:
⚒
Plastic hammer
Assembly instructions:
1. Mount the hangers to the carrier using suitable
expanding rivets.
2. Use the plastic hammer for fixing.
Step 3
Assembly instructions:
1. Connect the screw terminal with the feed cable.
DANGER!
Danger of life due to electrical current!
Contact with live parts can result in life-threating inju-
ries.
►
Make sure that the components are not live or in
tension unauthorized approximation.
Step 4
Assembly instructions:
1. The screw head must point in the direction of the
running surface
2. Push the screw terminals with feed cable into the
transfer guide.
Summary of Contents for VCL Series
Page 95: ...INDEX 93 U Unloading 88...
Page 96: ...CE Technical Documentation...
