DISPLAYS
27
7
DISPLAYS
Control units series DCS1 include a two line OLED display (2x16 characters), which is used to display status
and operating displays.
Standard display
Display
Explanation
Only for HW communication type!
Currently issued frequency and the status of the inputs (HEX
coded)
Display
Explanation
Only for the communication type PCB and SMGM!
Currently selected speed, currently issued frequency and the
status of the inputs (HEX coded)
Display
Explanation
Only for PCB communication type!
Vehicle ID, current position, current frequency and status of the
inputs.
Display
Explanation
Only for SMGM communication type!
Display if the communication to the higher ranking PLC is inter
-
rupted.
Display
Explanation
Displays for infrared manual operation:
Current frequency and the status of the inputs (HEX coded). The
star in the right lower corner flashes and remains visible in each
status display as long as the IR manual mode is active.