INSTRUCTIONS FOR OPERATION AND CARE
Your new fan comes to you completely assembled and ready to operate. We suggest that, upon removing the unit
from its carton, you carefully inspect it for any possible damage in transit. When using the fans, note the directional
airflow indicator on the external shell. This is the way the air moves.
Prior to plugging in, inspect inlet and outlet screen and remove debris which may restrict airflow movement.
When used with duct.
A. Do not install duct when fan is in operation.
B. Place duct lip over duct adaptor, secure firmly, note direction of airflow.
WARNING - THIS APPLIANCE MUST BE EARTHED
The wire of this mains lead are coloured in accordance
with the following code:
BLUE
-
NEUTRAL
BROWN
-
LIVE
YELLOW/GREEN -
EARTH
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire coloured brown must be connected to the terminal marked with the letter - L - or coloured red.
The wire coloured blue must be connected to the terminal marked with the letter - N - or coloured black.
The wire coloured yellow/green must be connected to the terminal marked with the letter E or (earth sign).
Ensure that your machine is connected correctly.
If you are in any doubt consult a qualified electrician.
This appliance must be protected by a 13A fuse if a 13A (B.S. 1363) plug is used or, if any other type of plug is used,
by a 15A fuse either in the plug or adaptor or at the distribution board.
Certain job site locations are classified as being hazardous because the atmosphere may contain gas vapour or dust
in explosive quantities.
THE FAN MUST NOT BE UTILISED BY ITSELF FOR PORTABLE AIR VENTILATION PURPOSES. SAFETY CAN
ONLY BE ASSURED AFTER MAKING THOROUGH GAS DETECTION TESTS COMBINED WITH FAN
VENTILATION AND CONTINUAL RETESTING.
Keep the Fan blade clean from debris. Accumulation of dust, dirt, paint etc on the Fan blade will throw the blade
rotation out of balance resulting in damage.
DO NOT PRESSURE WASH THE FAN
DANGER
THE ELECTRIC MOTOR AND FAN HOUSING ARE NOT DESIGNED FOR OPERATION IN AN
EXPLOSIVE AND/OR FLAMMABLE ATMOSPHERE OF ANY CLASS OR GROUP. OPERATION OF
THE FAN IN AN EXPLOSIVE OR FLAMMABLE ATMOSPHERE MAY RESULT IN PROPERTY
DAMAGE, PERSONAL INJURY OR EVEN DEATH.
DANGER
ALWAYS ASSUME A CONFINED SPACE WORK AREA IS CONTAMINATED UNTIL IT HAS BEEN
PROVEN SAFE FOR WORK PERSONNEL. NEVER ENTER A CONFINED SPACE WORK AREA
UNTIL IT HAS BEEN THOROUGHLY TESTED WITH APPROPRIATE GAS DETECTION
EQUIPMENT AND PROVEN SAFE FOR WORK PERSONNEL.
DANGER
ALWAYS SHUT OFF THE FAN AND UNPLUG IT FROM ITS POWER SOURCE TO PREVENT
ACCIDENTAL STARTING AND THE POSSIBILITY OF ELECTRICAL SHOCK AND/OR
ELECTROCUTION. BE SURE THE FAN BLADE HAS STOPPED ROTATING BEFORE PLACING
ANY OBJECTS OR FINGERS NEAR THE FAN GRILL.
DANGER
DO NOT OPERATE THE FAN WITHOUT THE INLET AND OUTLET GRILL PROPERLY IN PLACE
Congratulations on your purchase of a new Miniveyor Air VAF-200 Fan from Miniveyor Products
Ltd. Your new unit was designed to provide you with maximum performance and service and
comes with the advantage of a 10 year warranty upgrade on the fan body. To register and take
advantage of this 10 year warranty upgrade
PLEASE COMPLETE AND RETURN THE
ENCLOSED WARRANTY VALIDATION FORM WITHIN 30 DAYS OF PURCHASE.
The Miniveyor Air fans work on positive and negative airflow and are designed either to extract
dust and fumes or blow clean air into a workspace. Please read the Operating Manual carefully to
ensure you get the most from your new unit.
