
Designation
Sensor CBU-PIRDALI-HB
E-number
13 014 88
Art. number
V-44B0306-151N
Max switched load
20mA (10 DALI-drivers)
Maximum switched load
(relay function)
10A
Load Inrush rating
200A / 300µs
Weight
200g
Rated current
10A
Terminal capacity
2,5mm²
Light detection range
1-999lux
Transceiver frequency
2.4GHz ISM band
Transceiver power
Up to 4dBm output power
and -93dBm RX sensitivity
Rated impulse voltage
2500V
Supply voltage AC
230VAC
Operational temperature
-20 to 35°C
Humidity
5 to 95% non-condensing
Material (casing)
Flame retardant ABS
Insulation class
2
IP rating
40
Compliance
CE
Supply frequency
50Hz
Hilma Anderssons gata 15 | 421 31 Västra Frölunda | +46 (0)31-23 56 00 | [email protected] | [email protected]
www.vadsbo.net
Sensor CBU-PIRDALI-HB
Casambi wireless, IP40, high-row / high-level,
recessed, multi-pyro, PIR presence sensor with
light sensor in a special window, equipped with
DALI dimming and switched outputs.
The sensor is excellent to use as a room solution
where the sensor DALI dims ceiling luminaires
and the relay output simultaneously controls
sockets or ambient lighting. With presence and
light sensor, energy-efficient lighting is ensured
after each weather and which only lights up when
someone is in the room. You can also switch to TW
profile and get circadian lighting that follows the
rise and set of the sun.
Warning | Warnung | Advertencia |
Aviso | Attention | Attenzione | Waarschuwing
EBDHS-B-CB-DD
Casambi wireless, IP40, high bay/high level, flush mounted, multi-pyro, PIR presence detector with
light sensor in dedicated window equipped with DALI dimming and switched outputs
Casambi – kabellos, IP40, Hochregal/High-Level, Unterputzmontage, Multi-Pyro, PIR Präsenzmelder
mit Lichtsensor in einem speziellen Fenster mit DALI-Dimmung und geschalteten Ausgängen
Casambi inalámbrico, IP40, compartimento alto/nivel alto, montaje encastrado, multi-pyro, PIR,
detector de presencia con sensor de luz en ventana dedicada equipado con atenuación DALI y
salidas conmutadas
Casambi sem fios, IP40, baía elevada/nível elevado, montagem embutida, multi-pyro, detetor de presença
PIR con sensore di luce in una finestra dedicata dotata di dimmeraggio DALI e uscite commutate
Casambi sans fil, IP40, plafond haut/haut niveau, montage encastré, multi-pyro, PIR, détecteur de
présence avec capteur de lumière dans une fenêtre dédiée équipée de gradation DALI et de sorties
commutées
Casambi Wireless, IP40, alloggiamento/livello alto, montaggio a incasso, multi-piro, rilevatore di presenza
PIR con sensore di luce in una finestra dedicata dotata di dimmeraggio DALI e uscite commutate
Casambi draadloze, IP40, hoog plafond/hoog niveau, verzonken, multi-pyro, PIR aanwezigheidsdetector
met lichtsensor in speciaal venster uitgerust met DALI-dimmen en geschakelde uitgangen
EN
This device should be
installed by a qualified electrician in
accordance with the latest edition
of the IEE wiring regulations.
DE
Dieses Gerät ist
ausschließlich von qualifizierten
Elektrofachkräften zu installieren.
ES
Sólo un electricista
cualificado debe instalar este
dispositivo.
PT
Somente um eletricista
qualificado deve instalar este
dispositivo.
FR
Seul un électricien
qualifié peut installer ce dispositif.
IT
Il dispositivo deve essere
installato da un elettricista
qualificato.
NL
Dit apparaat moet
worden geïnstalleerd door een
gekwalificeerde elektricien.
WDA026 Issue 1 Installation Guide
EBDHS-B-CB-DD
Downloads and Videos | Downloads und Videos | Descargas y Videos | Descargas e Videos |
Téléchargements & Vidéos | Downloads e Video | Downloads en Video’s
cpelectronics.co.uk/cp/A026
Warning
This device should be installed by a
qualified electrician in accordance
with the latest edition of the IEE
management rules.
DALI-output 1-100% Relay output L': OFF
Works!
DALI-output 0%
Relay output L': OFF
Works!
DALI-output 1-100% Relay output L': ON
Works!
DALI-output 0%
Relay output L': ON
Does not work!
Valid sensor output settings: