background image

 

WG-81389-C/P & WG-81552-C/P

Pop up bath filler wastes

Installation & maintenance instructions 

Please leave these instructions with the customer

Vado

Wedmore Road, Cheddar, Somerset, England BS27 3EB

tel 01934 744466.      fax 01934 744345

[email protected]

www.vado-uk.com

  Guarantee

  Customer/technical services

For any technical or installation queries please contact Vado on 01934 745163.

GUARANTEE REGISTRATION

NAME
ADDRESS

RETAILER
ADDRESS

PURCHASE DATE
PRODUCT DESCRIPTION
WHO INSTALLED THE PRODUCT?
FOR VADO USE

POSTCODE

POSTCODE
ARTICLE NUMBER

(SEE BOX)

RETAILER

PLUMBER

BUILDER

SELF

This product is guaranteed against manufacturing defects from the date of purchase until the expiry of the relevant 
guarantee period shown below.

The guarantee is only valid if:-

1. The product has been installed, used and maintained in accordance with Vado’s instructions and subjected to 
normal use only.
2. The defect is not due to use of an unsuitable or inadequate water or power supply.
3. The defect is not due to accident, misuse, neglect or repair other than by Vado or Vado authorised agents or 
damage caused by foreign objects or substances.
4. We have received from you the completed Guarantee Registration Form. Vado accepts no responsibility for any 
forms lost in the post and returns by registered means is therefore recommended.
Under this guarantee (which is non-transferable) Vado will, at its option, repair or replace free of charge any product 
(or replacement part) found to be defective. The guarantee does not extend to any consequential loss or damage. 
After repair or replacement the relevant guarantee period will be calculated from the original date of purchase.

The relevant guarantee periods are:-

1. Twelve years on chrome finish products.
2. Six years on Vado Identity products.
3. Three years on all other products with the exception of Stuart Turner Pumps which carry a 2 year Guarantee on 
Monsoon Range and 1 Year Guarantee on Showermate Range.
All claims under the guarantee must be submitted in writing to the person who supplied the product to you and 
must be received no later than the last day of the relevant guarantee period. All claims must be accompanied by 
proof of purchase (sales receipt or delivery note).
Vado operates a policy of continuous product development and therefore reserves the right to change the product, 
packaging and documentation specifications without notice.
This guarantee is in addition to and does not affect your statutory rights as a consumer.

Summary of Contents for WG-81389-C

Page 1: ...ve received from you the completed Guarantee Registration Form Vado accepts no responsibility for any forms lost in the post and returns by registered means is therefore recommended Under this guarantee which is non transferable Vado will at its option repair or replace free of charge any product or replacement part found to be defective The guarantee does not extend to any consequential loss or d...

Page 2: ...g UK BS6700 Regulations We strongly recommend that you use a qualified and registered plumber Installer must comply with current regulations Please note if installing in an enclosed environment access should be left for servicing and maintenance No costs relating to inadequate access can be accepted Care of the waste Our products are finished to the highest standard and due care needs to be taken ...

Page 3: ...ting screw Locking nut Operation Turning the handle anti clockwise closes the plug Turning the handle clockwise opens the plug Assembly and installation 81389 The length of the overflow pipe can be adjusted by pulling apart or pushing together the inner and outer overflow pipes Should you need to reduce the length even more pull the outer overflow out of the collet cut both the outer overflow pipe...

Page 4: ...mall lever at the 12 o clock position secure the handle using the grub screw in the underside and tighten with the supplied allen key push on the screw cover Connect to the supply pipework Overflow waste assembly Retaining nut Rubber seal Overflow housing Handle Inlet elbow Screw cover Inlet elbow Cable to pop up waste Inner overflow pipe Outer overflow pipe Collet Push the seal onto the waste ass...

Reviews: