CLIO Service Manual
CLIO Tear-down & Rebuild
5.12.1. LCD
U
NIT
–
R
EMOVAL
Follow Steps 1-8 of the Display Bezel removal procedure, above.
5.12.2. LCD
S
CREEN
–
R
EFIT
Follow Steps 4-12 of the Display Bezel refit procedure, above.
5.13. I
NDICATOR
PWB
U
NIT
–
R
EMOVE
&
R
EFIT
Please refer to photos 12, 13, 17 in Chapter 2.
5.13.1. I
NDICATOR
PWB
U
NIT
–
R
EMOVAL
1.
Follow the Keyboard Base Bottom removal procedure, above.
2.
Using tweezers or a pair of miniature needle-nose pliers, gently grasp the Indicator PWB
Unit (51, 52) and lift it straight up out of its slot.
3.
Gently peel off the tape securing the Indicator PWB Unit ribbon cable (53) to the
Keyboard Assembly (40). Bend the ribbon cable (53) back towards you to expose the
solder connections from the ribbon cable (53) to the Indicator PWB Unit (51, 52).
4.
Un-solder the ribbon cable (53) from the Indicator PWB Unit (51, 52). Store the
Notification Board (51, 52) in a secure location.
5.13.2. I
NDICATOR
PWB
U
NIT
–
R
EFIT
1.
Solder the Indicator PWB Unit (51, 52) to the ribbon cable (53). With the Indicator PWB
Unit (51, 52) facing you, the red LED on the Inverter PWB Unit (51, 52) should be on the
right.
2.
With the Indicator PWB Unit (51, 52) soldered in place, bend the ribbon cable (53) into
position above the Keyboard Assembly (40).
3.
Using tweezers or a pair of miniature needle-nose pliers, gently grasp the Indicator PWB
Unit (51, 52) and insert it straight into its slot. Secure the Indicator PWB Unit ribbon
cable (40) in position above the Keyboard Assembly (40) with tape.
4.
Follow the Keyboard Base Bottom refit procedure, above.
5.14. I
NDICATOR
PWB
C
ABLE
–
R
EMOVE
&
R
EFIT
Please refer to photos 12, 13, 17 in Chapter 2.
5.14.1. I
NDICATOR
PWB
R
IBBON
C
ABLE
–
R
EMOVAL
1.
Follow the Indicator PWB Unit removal procedure (above).
2.
Un-solder the Indicator PWB cable (53) from the Main PWB Unit (51, 52).
5-10
The information contained in this document is confidential and the sole property of Vadem Inc. Written
permission must be obtained to reprint or use any of this information.
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]