Vadem Clio Service Manual Download

Page: 104 / 106

CLIO Service Manual

CLIO Tear-down & Rebuild

5.26.1. M

ETAL

–

EMOVAL

Follow the Lower Hinge Arms removal procedure, above.

Grasp the CLIO unit and turn it upside-down.

Grasp the Metal Arm (27) and lift it straight up. Store in a secure location.

5.26.2. M

ETAL

–

EFIT

With the CLIO unit in standard orientation, turn it upside-down if not already positioned
properly.

Lower the U shaped Metal Arm (27) straight down into position against the CLIO unit.

Turn the CLIO unit right side up (standard orientation).

Follow the Bottom Hinge refit procedure, above.

5.27. I

NDICATOR

ENS

–

EMOVE

EFIT

Please refer to photo 9 in Chapter 2.

5.27.1. I

NDICATOR

ENS

–

EMOVAL

This item is removed as part of the Keyboard Base Bottom removal procedure, above.

5.27.2. I

NDICATOR

ENS

–

EFIT

This item is refitted as part of the Keyboard Base Bottom removal procedure, above.

5.28. IR

ENS

–

EMOVE

EFIT

Please refer to photo 9 in Chapter 2.

5.28.1. IR

ENS

–

EMOVAL

This item is removed as part of the Keyboard Base Bottom removal procedure, above.

5.28.2. IR

INDOW

–

EFIT

This item is refitted as part of the Keyboard Base Bottom removal procedure, above.

5-18

The information contained in this document is confidential and the sole property of Vadem Inc. Written
permission must be obtained to reprint or use any of this information.

AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]

Summary of Contents for Clio











































































































Search results

Summary of Contents for Clio

Reviews:

Related manuals for Clio

Brands by name

Popular brands

Vadem Clio, Service Manual

Search results

Summary of Contents for Clio

Reviews:

Related manuals for Clio

Brands by name

Popular brands