Administration and Operation – EasyIP TableMIC D Microphones
This chapter is specific to the EasyIP TableMIC D with Dante networked audio. For information about the
TableMIC, see
Administration and Operation – TableMIC Microphones
You will need the following applications to work with EasyIP microphones:
n
Dante Controller
– For routing microphones and speakers with Dante
®
connectivity to the A/V
equipment. Download and install the free Dante Controller application from Audinate Pty. Ltd.:
www.audinate.com/products/software/dante-controller
n
Vaddio Dante Interface Application
– For accessing EasyIP microphone settings and adjustments,
and for updating EasyIP microphone firmware. Download the Vaddio Dante Interface Application
from the Vaddio resources page at
https://www.legrandav.com/en/tools_and_training/tools/vaddio_
.
About Dante Technology and Devices
Audinate Pty. Ltd (
) provides the latest information, training, and documentation for
Dante technology on their website. Information in this manual about Dante technology and Audinate
products may be out of date.
Things to know about Dante technology and the Dante Controller application:
n
Dante technology does not work over Wi-Fi.
n
Dante Controller does not work across subnets.
Your computer must be on the same subnet as
the Dante devices you need to work with.
n
Default device names and IP addresses shown in Dante Controller do not match the
corresponding information shown in Vaddio devices' web interfaces.
The Dante chip in each
Dante device has its own IP address and device name. The Dante Controller application uses this
information.
n
Dante Controller allows you to rename devices
, so you can make their identifying labels match
what's displayed in the Vaddio web interface. We recommend doing this.
Complete Manual for TableMIC and EasyIP TableMIC D Conference Room Microphones
13
