Connectors
n
12 VDC, 3.0 Amp power connector
– Connect only the PoE splitter shipped with the camera.
n
Network/PoE+
– 10/100 Ethernet/PoE+ port allows the RoboTRAK™ IR camera to control the video
camera, and provides access to the web interface.
n
DIP switches
– Factory use only.
Lanyard
Vaddio recommends purchasing a second lanyard as a spare or for smooth transitions between multiple
presenters.
Medallion
– Houses charging and control circuitry, switches to standby (low-power) mode when the IR
camera switches to standby.
n
Button
– On/off switch for IR sources
n
Illuminated ring
– Visual status indicator directs light toward the wearer,
not the audience
n
Battery
– Rechargeable Li-ion battery; up to 25 hour battery life, roughly 4
hour charging time
n
USB micro-B charging port
– Connect the supplied battery charger
n
Recessed power switch
– Allows you to turn off the lanyard completely to
extend battery life
Ribbon
– Holds the medallion and contains the IR sources.
n
Strand of IR LEDs
– Provide a characteristic image pattern that the
camera identifies and tracks
n
Safety clasp
– Automatically releases under tension
Caution
Do not pinch, crease, or stretch the lanyard ribbon. Do not pull the lanyard ribbon to release the clasp. Any
of these will damage the circuitry in the ribbon.
6
Integrator's Complete Guide to the RoboTRAK Presenter Tracking System
