Additional Camera Settings
S
YSTEM PAGE
, DIP S
WITCHES TAB
The DIP Switches tab of the System page provides access to these features via soft switches:
LED color scheme
– Status light color codes for Pro AV (broadcast) or UC (unified conferencing); set to
Pro AV by default, to follow the standard for broadcast cameras. At this time, the two color schemes are
functionally identical on this camera.
USB stream format (UVC Compliant or Client Custom)
– Client Custom enables far-end camera
control when used with the Zoom soft client.
LED on/off
– In most cases, Vaddio recommends leaving the status light on, to let people in the room
know whether the camera is currently sending video.
Standard Control Mode/Codec Control Mode
– Select Codec Control Mode if using the camera with a
third-party codec.
Enable/Disable LED in Standby Mode
– If the LED is enabled in standby (low-power) mode, it
illuminates purple when the camera is in standby mode. If the LED is disabled, it turns off when the camera
is in standby mode.
Manual Standby/USB Standby
– By default, the camera goes to standby mode only when it receives a
standby command. When USB standby is selected, the camera automatically goes to standby mode when
no USB stream is present.
Note
By default, the camera's status light is active during normal operation; however, it can be configured to
remain off when the camera is powered up. The camera may be sending video even if the indicator light is
off.
53
Complete Manual for RoboSHOT USB Enterprise-Class PTZ Conferencing Cameras
