Move the Camera to a Preset Position
Use the numbered Preset buttons to move the camera to any of its programmed positions. If you select a
preset that has not yet been programmed, nothing happens.
Store a Camera Preset
Save Preset 1 first. Other presets will inherit its Tri-Sync settings if they have not yet been defined.
1. Set up the camera shot, then use the Store button to open the Store Preset box.
2. Click one of the numbered preset buttons.
3. Check Save with Tri-Sync to allow the pan, tilt, and zoom motors to move simultaneously.
4. If necessary, use the speed slider to set Tri-Sync speed. For tight shots, slower is better.
5. To save the current color settings along with the camera position, check Save with current color
settings.
6. Save the preset.
Note:
The Tri-Synchronous Motion algorithm works best for on-air shots requiring significant movement in more
than one axis. It is not useful when moving the camera less than 10° or when the camera is not on the air.
You may need to experiment with the Tri-Sync setting.
18
Integrator's Complete Guide to the RoboSHOT 20 UHD High Performance, Ultra High Definition PTZ Camera