VADDIO RoboSHOT 20 UHD Page 48 Integrator'S Complete Manual Download

Page: 48 / 73

RS-232 Serial Communication

The RS-232 serial port (color-coded blue) near the center of the camera's back panel provides another
means of controlling the camera.

Specification

Value

Communication Speed

9600 bps (default)

Number of start bits

Number of stop bits

Number of data bits

Parity

None

Flow control

None

Connector pin-out:

Pin 1: Not used

Pin 2: Not used

Pin 3: Not used

Pin 4: Not used

Pin 5: Not used

Pin 6: GND

Pin 7: RXD (from TXD of control source)

Pin 8: TXD (to RXD of control source)

Caution

Check Cat-5 cables for continuity before using them. Using the wrong pin-out may damage the camera
system and void the warranty.

The Vaddio RoboSHOT Control Protocol is similar to the Sony

VISCA command set in order to be

compatible with several popular control devices. Not all VISCA commands are supported and there are
Vaddio-specific commands in the following command and inquiry lists.

Integrator's Complete Guide to the RoboSHOT 20 UHD High Performance, Ultra High Definition PTZ Camera

Summary of Contents for RoboSHOT 20 UHD










































































Search results

Summary of Contents for RoboSHOT 20 UHD

Reviews:

Related manuals for RoboSHOT 20 UHD

Brands by name

Popular brands

VADDIO RoboSHOT 20 UHD, Integrator'S Complete Manual

Search results

Summary of Contents for RoboSHOT 20 UHD

Reviews:

Related manuals for RoboSHOT 20 UHD

Brands by name

Popular brands