camera preset
Moves the camera to the specified preset, or stores the current camera position and optionally CCU
information, either with or without specifying that Tri-Synchronous Motion is to be used when moving to this
position.
Note
This command corresponds to the CAM_Memory commands in the RS-232 command set.
Synopsis
camera preset { recall <1 - 16> | store <1 - 16> [tri-sync <speed>] [save-ccu]
Parameters and
Values
recall
<1 - 16>
Moves the camera to the specified preset,
using Tri-Synchronous Motion if this was
saved with the preset. If CCU information
was saved with the preset, the camera
switches to the CCU setting associated
with the preset.
store
<1 - 16>
Stores the current camera position as the
specified preset.
tri-sync
<speed> 1 - 24
Optional
– specifies that the camera uses
Tri-Synchronous Motion to move to this
position, using the specified speed.
save-ccu
Optional
– Saves the current CCU
settings as part of the preset. If not
specified, the last color settings are used
when recalled.
Examples
camera preset recall 3
Moves the camera to preset 3.
camera preset store 1
Saves the camera's current position as preset 1.
camera preset store 4 tri-sync 15
Stores the camera's current position as preset 4. The camera will use Tri-
Synchronous Motion at speed 15 when it is recalled to this preset.
camera preset store 2 tri-sync 10 save-ccu
Stores the camera's current position as preset 2. The camera apply the
current CCU settings and use Tri-Synchronous Motion at speed 15 when it
is recalled to this preset.
35
Integrator's Complete Guide to the RoboSHOT 20 UHD High Performance, Ultra High Definition PTZ Camera