Adjusting the Focus
C
AMERA PAGE
Open the Focus control to select Auto-focus, or set manual focus with the + (near) and – (far) buttons.
I know you already understand this, but I’m going to say it anyway: The + and – buttons don’t work when
Auto Focus is selected.
Focus control is available to users via the IR Remote Commander, but it is not available on the operator's
Controls page of the web interface.
Setting the Speed for Manual Movements
C
AMERA PAGE
The Pan Speed, Tilt Speed, and Zoom Speed sliders control how fast the camera moves in response to the
direction and zoom controls on the IR remote and in the web interface. These speeds are also used in
moving to presets saved without Tri-Synchronous Motion information.
Use the arrow and Zoom controls to check camera speed, and use the Speed sliders to adjust as needed.
64
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
