To work with items on other menus:
1. Turn the knob to navigate from the home menu to
the item you need to change. The @ symbol
indicates the menu item to which you have
navigated.
2. Press the Select button to change the menu knob
to adjustment mode. The @ symbol changes to a
> symbol.
3. Turn the menu knob to adjust the selected item.
4. When the item is adjusted properly, do one of
these things:
o
Press the Cancel button to put the menu knob
back into navigation mode. This will not set the
menu item back to its previous value.
o
Do nothing. After a few seconds, the display
blinks once to indicate that the Menu knob has
returned to navigation mode.
Available adjustments include:
n
Shutter
– Set the shutter speed. Range is 1 to
10000. This cannot be adjusted when Iris is in
auto mode.
n
NR
(Noise Reduction) – Range is 0 through 5.
n
Wide Dynamic Range
(WDR) – On or Off. This
cannot be enabled when Iris is in manual mode,
nor can it be enabled when Backlight Compensation is enabled. The next three items are WDR
adjustments.
o
Display Brightness Level
– Range is 0 (dark) through 6 (bright).
o
Brightness Compensation
– Range is 0 (dark) through 3 (bright).
o
Compensation Level
– Range is 0 (low) through 2 (high).
n
Skew
– If the cables from the Universal CCU to the camera are not all the same length, video quality
may be reduced. Change the skew setting to compensate for the difference in cable length. The
optimum setting is usually in the middle of the range of skew values which pass acceptable video.
Range is 1 through 16.
n
HDMI
– Set the HDMI color space. Default is YCrCb; sRGB is also available.
n
Y-Gain
– Adjust the video ±10 IRE at all outputs as needed for associated video equipment.
n
Scene Config
– Navigate through the six factory-defined CCU scenes, or press one of the three
Scenes buttons to select a custom scene. If the selected custom scene has not been defined on the
camera, the Universal CCU presents a message saying there is no such scene, and reverts to the
default scene (Auto).
70
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
