Installing the Camera
Be sure you have already set the camera's switches.
If you are installing the camera with a Quick-Connect USB or Quick-Connect USB Mini on a network that
uses static IP addressing (a non-DHCP network), be sure you have already configured the camera
appropriately for the network.
Caution
Check your cables. Connecting a cable to the wrong port or using the wrong pin-out can result in equipment
damage and will void the warranty.
1. Route the cables to the camera location.
2. Route the cables through the mount, and install the mount on the wall or attach it to the wall box. Leave
the screws loose enough to adjust the position of the mount.
3. Level the mount and tighten the mounting screws.
4. Connect the cables to the camera.
o
If using a Quick-Connect Universal CCU, connect the
36 VDC To Camera
output to the camera's
36 VDC From QCCU Only
port.
o
If connecting the camera to any other Quick-Connect device or to an AV Bridge Matrix Pro, connect
power to the
EZ Power Video
port.
Be sure to connect the cables correctly. Connecting a cable to the wrong port could damage the camera
and void the warranty.
5. Place the camera on the mount.
6. Attach the camera to the mount using the ¼”-20 x .375 mounting screw supplied with the camera.
Images for illustration only; not to scale. Camera and mount details may differ.
33
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
