Basic Connections: RoboSHOT QUSB System
RoboSHOT QUSB systems ship with a USB 2.0 cable to connect the Quick-Connect USB to a computer
running a soft conferencing application. The Quick-Connect USB provides connections for a camera
controller or other control device, and HDMI and YPbPr (analog component video) outputs to display video
from the camera (near-end video).
Note
If installing the camera in a non-DHCP network (one that does not automatically assign IP addresses), do
not connect the camera to the network until you have configured it with a static IP address.
See
Configuring the Camera with a Static IP Address
for step-by-step instructions.
28
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
