The Quick-Connect USB Interface
This is a versatile USB 2.0 device for environments using soft conferencing applications. With
simultaneous HDMI and HD analog component (YPbPr) video outputs and your choice of either USB or IP
streaming, plus a web interface for ease of configuration, the Quick-Connect USB is an ideal connectivity
solution for many environments.
Front panel features:
n
Back-lit LCD display
– During normal operation, the display shows the MAC address and IP address
for the Quick-Connect. When the Quick-Connect is booting, the display shows an initialization
message.
n
Power System Reset button
– Illuminates when the Quick-Connect is connected to power. Press and
hold the button to reboot the Quick-Connect.
n
USB indicator
– Illuminates when there is a USB connection to a computer. Blinks to show USB
activity.
n
Network indicator
– Illuminates when there is a network connection. Blinks to shown network activity.
Back panel features:
n
24 VDC 2.0 A power connector
– Connect only the power supply shipped with the Quick-Connect.
n
5-position DIP switch
– Setting for HDMI color space; firmware update configuration; factory reset.
n
RS-232 In
– Camera control input from a Vaddio joystick controller or other controller.
n
EZ-Power Video
– Power to the camera and video from the camera.
n
RS-232 Out to Camera
– Control signals to the camera; may originate from the connected camera
controller or the web interface.
n
YPbPr
– Analog component video output from the camera.
n
HDMI
– HDMI video output from the camera.
n
Network
– Connect to the network for IP streaming and camera control via web interface or Telnet, and
for access to the Quick-Connect's web interface.
n
USB
– Connect to a USB 2.0 port on the computer running the soft conferencing or video capture
application.
19
Complete Manual for RoboSHOT 12 and RoboSHOT 30 Robotic PTZ Cameras
