A Quick Look at the Camera
This section covers the physical features of the camera.
Front of the Camera
Camera and Zoom Lens:
The PrimeSHOT 20 HDMI camera features a 20x optical zoom lens.
IR sensor:
Receives signals from the IR remote. Make sure there's nothing directly in front of the camera
base, and point the remote at the camera.
Status light:
The multi-colored LED indicates the camera's current state. This light can be turned off.
n
Blue – Camera is active
n
Red – Tally
n
Purple – Standby mode or booting
n
Yellow – Firmware update is in progress
n
Blinking red – Video mute is on (UC color scheme only)
n
Blinking yellow – Motor out of calibration
n
Blinking purple – Error
Note
By default, the camera's status light is active during normal operation; however, it can be configured to
remain off when the camera is powered up. The camera may be sending video even if the indicator light is
off.
3
Complete Manual for the PrimeSHOT 20 HDMI PTZ Camera
