camera ccu scene
Stores the current CCU scene or recalls the specified ccu scene.
Synopsis
camera ccu scene {recall {factory <1 - 6> | custom <1 - 3>} | store custom <1 - 3>}
Options
recall factory
<1 - 6>
recall custom
<1 - 3>
Recalls the camera to the specified scene
(factory 1 - 6 or custom 1 - 3) .
store custom
<1 - 3>
Saves the current scene as the specified
custom scene.
Examples
>
camera ccu scene recall factory 2
OK
>
Sets the camera to use factory CCU scene 2.
>
camera ccu scene store custom 1
OK
>
Saves the current CCU scene as custom CCU scene 1.
camera led
Set or change the behavior of the indicator light.
Synopsis
camera led { get | off | on }
Options
get
Returns the indicator light's current state (on or
off).
off
Disables the indicator light.
on
Enables the indicator light.
Examples
>
camera led off
OK
>
Disables the indicator light. You cannot tell by looking at the camera whether it is
sending video.
>
camera led get
led:
on
OK
>
Returns the current state of the indicator light.
camera recalibrate
Recalibrates the pan and tilt motors. This is typically done in response to a motor fault indication or error
message.
Synopsis
camera recalibrate
Example
>
camera recalibrate
OK
>
39
Complete Manual for the PrimeSHOT 20 HDMI PTZ Camera
