VADDIO PrimeSHOT 20 HDMI Page 27 Complete Manual Download

Page: 27 / 70

Adjusting the Color Settings

Fine-tune the color and lighting as needed using the Color Settings controls.

Auto Iris

allows the camera to compensate automatically for the light level. Clear this box to adjust iris

and gain manually.

Backlight Compensation

(available with Auto Iris) reduces contrast to adjust for bright light behind the

main subject of the shot. This setting can't be used with Wide Dynamic Range.

Wide Dynamic Range

(available with Auto Iris) increases the contrast between the brightest and

darkest areas. This setting can't be used with Backlight Compensation.

Auto White Balance

adjusts color automatically. Clear this box to adjust red gain and blue gain

manually.

Red Gain

and

Blue Gain

(available when Auto White Balance is not selected) provide manual color

adjustment.

Detail

adjusts the image sharpness. If the video looks grainy or “noisy,” try a lower Detail setting.

Chroma

adjusts the color intensity.

Gamma

adjusts the range between bright areas and shadows.

If you make a change that you don't like, start over by selecting and then deselecting Auto White Balance.

Complete Manual for the PrimeSHOT 20 HDMI PTZ Camera

Summary of Contents for PrimeSHOT 20 HDMI







































































Search results

Summary of Contents for PrimeSHOT 20 HDMI

Reviews:

Related manuals for PrimeSHOT 20 HDMI

Brands by name

Popular brands

VADDIO PrimeSHOT 20 HDMI, Complete Manual

Search results

Summary of Contents for PrimeSHOT 20 HDMI

Reviews:

Related manuals for PrimeSHOT 20 HDMI

Brands by name

Popular brands