Telnet Serial Command API
The Vaddio Telnet serial command API is a high-level, text-based command line interface. Use a Telnet
client to access the API via the network. The default Telnet port is 23. Telnet sessions require the
administrator account login.
Using a question mark as a command parameter will bring up
a list of available commands for the menu you are in.
Things to know about control via Telnet session:
n
Command lines are terminated with a carriage return.
n
All ASCII characters (including carriage returns) are
echoed to the terminal program and appended with the
VT100 string ESC[J (hex 1B 5B 4A), which most terminal
programs automatically strip.
n
CTRL-5 Clears the current serial buffer on the device.
Typographical conventions:
n
{ x | y | z} – Choose x, y, or z.
n
<variable> – Substitute the desired value here.
n
< x - y > – Valid range of values is from x through y.
n
[parameter] – Parameter is not required.
Note
The commands in this guide refer to the OneLINK HDMI camera extension module. To control the camera
itself, open a Telnet session to the camera's IP address and use the camera's Telnet commands.
help
Displays an overview of the CLI syntax.
Synopsis
help
Example
help
21
Integrator's Complete Guide to the OneLINK HDMI Extension Module for HDBaseT Cameras
