Configuring Network Settings
N
ETWORKING PAGE
Things you can do on this page:
n
Specify time zone and NTP server
n
Assign a hostname to the OneLINK HDMI camera extension module
n
Specify DHCP or static IP addressing for the camera extension module
n
Set up other networking information
After you enter or change information on this page, click Save.
Note
Changes on the OneLINK HDMI web interface do not affect the attached camera's network configuration.
The camera has its own separate IP address. Use the camera's own web interface to configure the
camera.
Note
DHCP is the default setting, but the extension module will use the default address of 169.254.10.1 if no
DHCP server is available.
11
Integrator's Complete Guide to the OneLINK HDMI Extension Module for HDBaseT Cameras
