Video and Streaming
What is it doing?
Possible causes
Check and correct
No USB stream.
The USB cable is not
connected.
Connect the USB cable.
No video.
Video is muted.
Unmute the video.
Need help? Call Vaddio Technical Support at (+1) 763-971-4400 or 800-572-2011.
Status Lights
The lights in the camera's head indicate its current state.
n
Purple – Initializing
n
White – Active
n
Blinking red – Video is muted
n
Yellow – Firmware update is in progress
n
Blinking cyan – Remote pairing mode
n
Blinking blue – Pairing error
Caution
Do not remove power or reset the camera while the status lights are yellow, showing a firmware update in
progress. Interrupting a firmware update can make the camera unusable.
Note
By default, the status lights on Vaddio cameras are active during normal operation; however, they can be
configured to remain off even when the camera is sending video.
62
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
