autoframer paused
Pause or resume Auto-framing. Auto-framing pauses automatically when the camera receives a pan, tilt,
zoom, or preset recall command from any source.
Synopsis
autoframer paused { get | off | on | toggle }
Options
get
Returns the pause state for Auto-framing.
off
Turns off the pause state (restarts Auto-framing).
on
PausesAuto-framing.
toggle
Changes the Auto-framing pause state.
Examples
>
autoframer paused on
OK
>
Pauses Auto-framing, placing the camera in manual mode.
>
autoframer paused get
autoframer paused:
true
OK
>
Returns the current pause state of Auto-framing.
autoframer default-wide
Specify how the camera behaves when it detects no motion. This setting is on by default.
Synopsis
autoframer default-wide { get | off | on }
Options
get
Returns the state of the Default Wide setting (on or
off).
off
Turns off Default Wide mode. The camera remains on
the shot where it last detected motion.
on
Turns on Default Wide mode. The camera zooms all
the way out when it detects no motion.
Examples
>
autoframer default-wide off
OK
>
Turns off Default Wide mode. The camera does not zoom out to "search" for motion.
>
autoframer default-wide get
default wide:
false
OK
>
Returns the current state of the Default Wide setting.
39
Complete Manual for the IntelliSHOT-M Auto-Tracking Camera
