VADDIO EasyMic MicPOD Series Release Notes & Update Instructions Download Page 1

 

 

 

RELEASE NOTES 

& UPDATE INSTRUCTIONS 

 

 

Release Notes for:  

EasyMic MicPOD Microphones: 

EasyMic Ceiling MicPOD 
EasyMic Table MicPOD (with keypad) 
EasyMic Table MicPOD (without keypad) - 

(Previous name: TRIO Table Mic Array)

 

 
Release Information:  

 
----- 
03/14/2018 
EasyMic 1.11 
Notes: 
- Improvements 

- General audio processing improvements. 
- Default behavior of camera button on EasyMic Table MicPOD (with keypad) has changed from 
momentary to latching. 
- Added ability to update MicPOD firmware from the Web UI of compatible Vaddio products. 

 
- User Notes 

- The firmware file and update process differs depending on the Vaddio product from which the connected 
MicPOD is updated. See update instructions on the following pages for more details. 

 
----- 
06/15/2015 
EasyMic 1.09 
Notes: 
- New Features 

- Added Interoperability Support for AV Bridge MATRIX PRO. 
 

- User Notes 

- For this firmware and all previous versions, microphones must be updated serially through the Vaddio 
EasyUSB Mixer/Amp. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for EasyMic MicPOD Series












Reviews: