VADDIO EasyIP Systems Complete Manual Download Page 66

Page: 66 / 95

camera comm host

ASY

IP D

ECODER ONLY

Directory operations – get the IP address of the device at the specified input, add or delete a device.

Synopsis

camera <input> comm host { get | set <host> | unset }

Options

<input>

Integer 1 to 4; specifies which input to manage.

get

Returns the IP address of the device at this
input.

set

<host>

Set this input to the IP address of an input
device. Equivalent to adding a device to the
directory using the web interface.

unset

Delete the IP address information for the
specified input. Equivalent to deleting a device
from the directory using the web interface.

Examples

camera 1 comm host get

host:

10.30.240.160 (connected)

video source

ASY

IP D

ECODER ONLY

Gets or sets the decoder's video source.

Synopsis

video source { get | set <input> }

Options

get

Returns the video input that is currently
selected.

set

Sets the video input that is currently selected.

<input1..input4>

Specifies the video input.

Examples

>video source get

source:

input2

Returns the video input that is currently selected, Input 2.

>video source set input1

Sets Input 1 as the selected video source.

Complete Manual for EasyIP Systems

Summary of Contents for EasyIP Systems
































































































Search results

Summary of Contents for EasyIP Systems

Reviews:

VADDIO EasyIP Systems, Complete Manual, Page: 66 / 95

Search results

Summary of Contents for EasyIP Systems

Reviews: