VADDIO EasyIP Systems Complete Manual Download Page 65

Page: 65 / 95

audio volume

ASY

IP D

ECODER ONLY

Gets or sets the volume of the specified audio channel.

Synopsis

audio < channel > volume { get | up | down | set }

Channels

master

Applies the command to all audio channels.

easy_mic_1

easy_mic_2

Applies the command to the external
microphone connected to the specified
EasyMic port.

usb_playback

Applies the command to the audio portion of the
incoming (far-end) USB stream

line_out_1

Applies the command to the audio from the
connected speaker.

usb_record

Applies the command to the outbound (near-
end) audio portion of the USB stream

Options

get

Returns the current volume of the specified
channel.

Increases the volume of the specified channel.

down

Reduces the volume of the specified channel.

set

Sets the volume of the specified channel.

Examples

audio line_in_1 volume set -5

Sets -5 dB as the volume for the device connected to the Line In 1 port.

audio line_out_1 volume get

volume -10.0 dB

Returns the current volume for the speaker connected to the line out port.

camera authenticate

ASY

IP D

ECODER ONLY

Authenticate to a camera in the directory.

Synopsis

camera <input> authenticate <password>

Options

<input>

Integer 1 to 4; specifies which camera input to
authenticate.

The camera's admin password.

Examples

camera 1 authenticate ********

Complete Manual for EasyIP Systems

Summary of Contents for EasyIP Systems
































































































Search results

Summary of Contents for EasyIP Systems

Reviews:

VADDIO EasyIP Systems, Complete Manual, Page: 65 / 95

Search results

Summary of Contents for EasyIP Systems

Reviews: