AV Bridge USB and IP Streaming Device
Page 19
6. This update can take up to 15 minutes, the pop-up message window will identify progress of update and when
it is completed.
After the update is complete, the new version can be verified on the front panel LCD display or user can log on
the web pages and navigate to the Help page. The version is displayed under system information. It is also
located under the System page.
Restoring Factory Defaults
The AV Bridge can be restored to factory defaults with the DIP Switches on the rear of the device. It can also be
done remotely with the internal web pages. The Process for defaulting AV Bridge to factory settings is:
Warning: Current settings will be erased.
You will need to do the initial device set-up procedure after restoring factory defaults.
1. Place all dip switches to the off position (down). A warning will be issued (without crocodile sign).
2. Press Reset on the front panel of the AV Bridge. Device will reboot to factory settings.
3. Put all DIP switches back up and set up the AV Bridge once again. You will need to do the initial device set-
up again.
Note
You will need to do the initial device set-up procedure after restoring factory defaults.
