camera preset
Moves the camera to the specified preset, or stores the current camera position and optionally CCU
information, either with or without specifying that Tri-Synchronous Motion is to be used when moving to this
position.
Synopsis
camera <1..8> preset { recall | store} <1..16> [tri-sync <1..24>] [save-ccu]
Options
recall
<1..16>
Moves the camera to the specified preset, using Tri-
Synchronous Motion if this was saved with the preset.
If CCU information was saved with the preset, the
camera switches to the CCU setting associated with
the preset.
store
<1..16>
Stores the current camera position as the specified
preset.
tri-sync
<1..24>
Optional: Specifies that the camera uses Tri-
Synchronous Motion to move to this position, using
the specified speed.
save-ccu
Optional: Saves the current CCU settings as part of
the preset. If not specified, the last color settings are
used when recalled.
Examples
>
camera 2 preset recall 3
OK
>
Moves camera 2 to its stored preset 3.
>
camera 2 preset store 1
OK
>
Saves camera 2's current position as its preset 1.
>
camera 2 preset store 4 tri-sync 15
OK
>
Stores camera 2's current position as preset 4. The camera will use Tri-Synchronous
Motion at speed 15 when it is recalled to this preset.
>camera 2 preset store 2 tri-sync 10 save-ccu
OK
>
Stores camera 2's current position as preset 2. The camera applies the current CCU
settings and uses Tri-Synchronous Motion at speed 10 when it is recalled to this
preset.
51
Integrator's Complete Guide to the AV Bridge MatrixMIX Multipurpose AV Switcher
