VADDIO AV Bridge MatrixMIX Integrator'S Complete Manual Download

Page: 46 / 82

Using Camera Presets

PERATOR

OME PAGE

To move the preview camera to a preset position, select the desired preset.

Depending on the camera and the preset definition, presets may include zoom, speed, and lighting
information along with the pan, tilt, and focus.

Presets are stored in the cameras.

Using Macros

PERATOR

ACROS PAGE

Macros are defined in the switcher's administrative interface. Some may be specific to connected
equipment rather than outputs.

Select the desired macro. Allow time for the macro to complete before starting another action.

Note

Some macros enforce a delay to allow time for completion. The delay can be a minute or more in some
cases.

Integrator's Complete Guide to the AV Bridge MatrixMIX Multipurpose AV Switcher

Summary of Contents for AV Bridge MatrixMIX



















































































Search results

Summary of Contents for AV Bridge MatrixMIX

Reviews:

Related manuals for AV Bridge MatrixMIX

Brands by name

Popular brands

VADDIO AV Bridge MatrixMIX, Integrator'S Complete Manual

Search results

Summary of Contents for AV Bridge MatrixMIX

Reviews:

Related manuals for AV Bridge MatrixMIX

Brands by name

Popular brands