VADDIO AV Bridge 2x1 Complete Manual Download

Page: 76 / 93

system factory-reset

Gets or sets the factory reset status. When the factory reset status is on, the system resets to factory
defaults on reboot.

Note

Factory reset does not affect settings managed in the Dante Controller application.

Synopsis

system factory-reset { get | on | off}

Options

get

Returns the device's current factory reset
status.

Enables factory reset on reboot.

off

Disables factory reset on reboot.

Examples

system factory-reset get

factory-reset (software):

off

factory-reset (hardware):

off

Returns the factory reset status.

This evaluates the most recent

system factory-reset

on or off command, if

one has been received, then reads the rear panel DIP switches and returns the
status

if they are all in the down position.

system factory-reset on

factory-reset (software):

factory-reset (hardware):

off

Enables factory reset upon reboot.

Note

This command does not initiate a factory reset. The factory reset takes place on the
next reboot.

version

Returns the current firmware version.

Synopsis

version

Example

version

Returns current firmware version information in a form something like this:

Complete Manual for the AV Bridge 2x1 Presentation Switcher

Summary of Contents for AV Bridge 2x1






























































































Search results

Summary of Contents for AV Bridge 2x1

Reviews:

Related manuals for AV Bridge 2x1

Brands by name

Popular brands

VADDIO AV Bridge 2x1, Complete Manual

Search results

Summary of Contents for AV Bridge 2x1

Reviews:

Related manuals for AV Bridge 2x1

Brands by name

Popular brands