Initial Device Set-Up from the Web Interface
To complete the initial device set-up from the web interface, you will need to do these things:
n
Discover the device's IP address. If you do not use the Vaddio Deployment Tool, you will need to be
able to view the HDMI output.
n
Browse to the device's IP address using HTTPS. This will generate warnings from your browser.
n
Complete the initial device set-up.
Getting the Device's IP Address
To see the current IP address for the AV Bridge 2x1, press the IP button on the front panel. The IP address
and other network information is displayed on the video outputs.
If the IP address is 169.254.1.1, you will need to connect your computer's network port directly to the
DATA IN port of the device's mid-span power injector. After completing the initial device set-up, you will
need to configure the device with a static IP address. Work with your network administratior.
Initial Access to the Web Interface
Before the product is configured, HTTP access is disabled.
This is also true after restoring factory
defaults.
When you access the web interface, you may encounter this message:
Switch to HTTPS if you see this message.
11
Complete Manual for the AV Bridge 2x1 Presentation Switcher
