About the Web Interface
The AV Bridge 2x1 presentation switcher provides a web interface to allow configuration via the IP network
connection, using a browser. The web interface allows you to:
n
Set idle session behavior and passwords
n
Manage network and streaming settings
n
Add identifying information to the web interface
n
Back up, reboot, reset, or update the device
n
View information about the device's firmware and current settings
You can access the web interface either through the network or from a computer connected directly to the
network port. If the device has never been in service, or if factory defaults have been restored, you will
need to do the initial setup before you can access the rest of the web interface.
Browser Support
Supported web browsers:
n
Chrome®
n
Firefox®
n
Microsoft® Internet Explorer®
n
Safari®
Other browsers may also work.
About the Vaddio Deployment Tool
The Vaddio Deployment Tool simplifies provisioning and system administration for most Vaddio products,
and provides a shortcut to each device's web interface. This tool is available as a free download at
https://info.legrandav.com/VaddioDeploymentTool
.
Ways the Vaddio Deployment Tool makes your tasks easier:
n
Easily scan your network for Vaddio devices – no more complicated procedures for discovering
devices' IP addresses.
n
View scan results as a dashboard; easily identify unprovisioned and unauthenticated devices.
n
Provision new devices or update device firmware from the dashboard.
n
Import or export device configurations, reboot, or restore a device to factory defaults from its detail
page.
n
Access devices' web interfaces directly.
n
Change a device's admin password from its detail page.
n
Standby and mute controls available on the dashboard for authenticated devices.
n
Organize Vaddio devices into groups – for example, by product type or physical location.
10
Complete Manual for the AV Bridge 2x1 Presentation Switcher
