Vaddio DomeVIEW Outdoor, Environment Pendant Mount Dome Installation and User Guide - Document 341-445 Rev C
Page 3 of 14
Outdoor Pendant Mount Dome Enclosures Only (Cameras Not Included)
The Outdoor Pendant Mount Dome Enclosures are for use with existing or standard Sony EVI-D70 and
Canon VC-C50iR. The Dome enclosures can also be used with the Vaddio Standard EZCamera Cable
system for the EVI-D70 or the VC-C50i analog PTZ cameras. The dome enclosures without cameras are
listed below:
998-9200-050 Outdoor Pendant Mount Dome Enclosure includes:
QTY Description
-
Camera bracket for Canon VC-C50iR PTZ camera
3
2” x .375 (50.8mm x 9.525mm) ¼”M to 8-32F Hex shaped stand-offs
1
6.25” x 5.25” (15.87cm x 13.34cm) Camera mounting stage
2
8-32 x .5” Flat head screws (flush mount)
2
8-32 x .5” pan head screws
2
#8 Lock washers for pan head screws
-
Outdoor Pendant Mount Dome Enclosure
1
Outdoor Pendant Housing Assembly (white outer shell, black inner shell
,
safety tethers)
1
Heater/blower fan assembly, mounting platform secured with three 10-32 x .5” flat head screws
1
8.2” (20.8cm) Smoke tinted dome bubble with four (4) attached stainless steel mounting screws
1 1-1/2”
NPT
Locknut
1
Foam dust plug for 1-1/2” NPT pipe fitting
1
Tube of pipe sealer and proprietary Allen wrench (do not lose this wrench)
1
24 VAC Power supply for the Heater/Blower
998-9200-070 Outdoor Pendant Mount Dome Enclosure includes:
QTY Description
-
Camera bracket for Sony EVI-D70 PTZ camera
3
1.125” x .375 (28.58mm x 9.525mm) ¼”M to 8-32F Hex shaped stand-offs
1
6.25” x 5.25” (15.87cm x 13.34cm) Camera mounting stage
2
8-32 x .5” Flat head screws (flush mount)
1
6.25” x 5.25” (15.87cm x 13.34cm) Camera mounting plate
1
¼”-20 x ½” Mounting screw (to attach camera to mounting plate)
2
8-32 x .5” pan head screws
1
#8 Lock washers for pan head screws
-
Outdoor Pendant Mount Dome Enclosure
1
Outdoor Pendant Housing Assembly (white outer shell, black inner shell, safety tethers)
1
Heater/blower fan assembly, mounting platform secured with three 10-32 x .5” flat head screws
1
8.2” (20.8cm) Smoke tinted dome bubble with four (4) attached stainless steel mounting screws
1 1-1/2”
NPT
Locknut
1
Foam dust plug for 1-1/2” NPT pipe fitting
1
Tube of pipe sealer and proprietary Allen wrench (do not lose this wrench)
1
24 VAC Power supply for the Heater/Blower
INSTALLATION INSTRUCTIONS
DomeVIEW System Packages with Dome, Camera and Internal Mounting Bracket
999-9200-050 DomeVIEW 50iR Outdoor Pendant Mount Dome System
999-9200-070 DomeVIEW 70 Outdoor Pendant Mount Dome System
Outdoor Pendant Mount Dome Enclosures
998-9200-050 for the Canon VC-C50iR PTZ Camera
998-9200-070 for the Sony EVI-D70 PTZ Camera
For PAL camera part numbers, the last digit is changed to “1” (i.e. 999-9200-071 is a DomeVIEW 70 PAL camera).
The instructions are for both PAL and NTSC.
Before Starting the Installation
For cabling requirements, see the Cabling Requirements section. All installation work must conform to local
building codes and should be performed by qualified personnel.