VADDIO 999-6907-000 Installation And User Manual Download Page 13

WallVIEW CCU HD-18

 

 

WallVIEW CCU HD-18 Manual 341-889 Rev. C 

 

               Page 13 of 18 

 
Warranty Information: 

 

Hardware* Warranty - 

One year limited warranty on all parts. Vaddio warrants this product against defects in 

materials and workmanship for a period of one year from the day of purchase from Vaddio.  If Vaddio receives notice 
of such defects during the warranty period, they will, at their option, repair or replace products that prove to be 
defective.  
 

Exclusions 

- The above warranty shall not apply to defects resulting from: improper or inadequate maintenance by 

the customer, customer applied software or interfacing, unauthorized modifications or misuse, operation outside the 
normal environmental specifications for the product, use of the incorrect power supply, improper extension of the 
power supply cable or improper site operation and maintenance.  
 

Vaddio Customer service 

– Vaddio will test, repair, or replace the product or products without charge if the unit is 

under warranty and is found to be defective. If the product is out of warranty, Vaddio will test then repair the product 
or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior 
to repair. All components must be returned for testing as a complete unit. Vaddio will not accept responsibility for 
shipment after it has left the premises.  
 

Vaddio Technical support 

- Vaddio technicians will determine and discuss with the customer the criteria for repair 

costs and/or replacement. Vaddio Technical Support can be contacted through one of the following resources: e-mail 
support at 

[email protected] 

or online at 

www.vaddio.com

.  

 

Return Material Authorization (RMA) number - 

Before returning a product for repair or replacement, request an 

RMA from Vaddio’s technical support. Provide a technician with a return phone number, e-mail address, shipping 
address, and product serial numbers and describe the reason for repairs or returns as well as the date of purchase 
and proof of purchase.  Include your assigned RMA number in all correspondence with Vaddio.  Write your assigned 
RMA number on the outside of the box when returning the product.  
 

Voided warranty 

– The warranty does not apply if the original serial number has been removed or if the product has 

been disassembled or damaged through misuse, accident, modifications, or unauthorized repair.  Cutting the power 
supply cable on the secondary side (low voltage side) to extend the power to the device (camera or controller) voids 
the warranty for that device.  
 

Shipping and handling 

- Vaddio will not pay for inbound shipping transportation or insurance charges or accept any 

responsibility for laws and ordinances from inbound transit. Vaddio will pay for outbound shipping, transportation, and 
insurance charges for all items under warranty but will not assume responsibility for loss and/or damage by the 
outbound freight carrier.  
• If the return shipment appears damaged, retain the original boxes and packing material for inspection by the carrier.  
Contact your carrier immediately. 
 

Products not under warranty 

- Payment arrangements are required before outbound shipment for all out of 

warranty products.  
 
*Vaddio manufactures its hardware products from parts and components that are new or equivalent to new in 
accordance with industry standard practices. 

 
 
Other General Information: 
Care and Cleaning 

Do not attempt to take this product apart at any time. There are no user-serviceable components inside.  

 

Do not spill liquids in the WallVIEW CCU HD-18  

 

Keep this device away from food and liquid  

 

For smears or smudges on the console, wipe with a clean, soft cloth with a light duty household cleaner that 
leaves no residue.  Repeated use of a “Windex®” type product with vigorous pressure may remove some of 
the silk screening and this will void the warranty.   

 

Do not use any abrasive chemicals.  

 

Operating and Storage Conditions: 

Do not store or operate the WallVIEW CCU HD-18 under the following conditions: 

 

Temperatures above 40°C (104°F) or temperatures below 0°C (32°F)  

 

High humidity, condensing or wet environments or In inclement weather  

 Dusty 

environments 

 

Summary of Contents for 999-6907-000



















Reviews: