Basic Connections – EasyIP Mixer
Here is an example of an EasyIP deployment using an EasyIP Mixer. In this setup, the EasyIP Mixer
manages up to four EasyIP cameras and provides hard-wired audio connections for speakers. The EasyIP
Mixer is paired to two network-connected EasyIP CeilingMIC D microphones. A computer connects to the
system as a USB conferencing device and HDMI content source.
A PoE+ switch provides power and network connectivity to the EasyIP products. If no PoE+ switch is
used, a mid-span PoE+ power injector (sold separately) is required for each EasyIP device.
Vaddio recommends making all connections while the PoE+ switch is turned off.
Caution
Do not connect the PoE+ switch to the network without guidance from an on-site network specialist.
Note
The EasyIP Mixer is compatible with EasyIP cameras only. It does not detect or pair with other types of
cameras.
17
Installation Guide for EasyIP Systems
