camera ccu get
Returns CCU (lighting and color) information.
When sending the command to a host device, you must specify the camera input.
Synopsis (host
device)
camera
<input>
ccu get <param>
Synopsis (camera) camera ccu get <param>
Options
<input>
Specifies the camera to control.
EasyIP Decoder: 1 to 4.
EasyIP Mixer: 2 to 5.
auto_white_balance
Returns the auto white balance state (on or off).
red_gain
Returns the red gain value (integer 0 to 255).
blue_gain
Returns the blue gain value (integer 0 to 255).
backlight_compensation
Returns the backlight compensation state (on or
off).
auto_iris
Returns the auto-iris state (on or off).
iris
Returns the iris value (integer 0 to 11).
gain
Returns the gain value (integer 0 to 11).
detail
Returns the detail value (integer 0 to 15).
chroma
Returns the chroma value (integer 0 to 14).
gamma
Returns gamma (integer -16 to 64)
wide_dynamic_range
Returns the current Wide Dynamic Range state
(on or off).
all
Returns all current CCU settings.
Examples
>
camera ccu get iris
iris
6
OK
>
(Sent to the camera) Returns the current red gain value.
>
camera 1 ccu get all
auto_iris
on
auto_white_balance
on
backlight_compensation
off
blue_gain
0
chroma
5
detail
8
gain
1
gamma
-4
iris
11
red_gain
0
wide_dynamic_range
off
OK
>
(Sent to the EasyIP Decoder) Returns current CCU settings for the Input 1 camera.
116
Complete Manual for EasyIP Systems
