VADDIO 999-21100-009 Complete Manual Download Page 65

Page: 65 / 86

Audio Commands

The following audio commands are available:

audio volume

audio mute

audio volume

Gets or sets the volume of the specified audio channel.

Synopsis

audio < channel > volume { get | up | down }

Channels

internal_mic

The built-in microphone

line_in

The Line In port (often a microphone)

usb_playback

Audio portion of the incoming (far-end) USB
stream

line_out

Line Out port (speaker output)

hdmi_out

Audio portion of the HDMI output (far-end
audio to the display's speakers)

ip_out

Audio portion of the IP stream output.

usb_record

Outbound (near-end) audio portion of the USB
stream.

Options

get

Returns the current volume

Increases the volume

down

Reduces the volume

Examples

audio line_in volume up
OK
>

Increases the volume for the device connected to the Line In port.

audio line_out volume get
volume -10.0 dB
OK
>

Returns the current volume for the speaker connected to the line out port.

Complete Manual for the IntelliSHOT Auto-Tracking Camera

Summary of Contents for 999-21100-009























































































Search results

Summary of Contents for 999-21100-009

Reviews:

Brands by name

Popular brands

VADDIO 999-21100-009, Complete Manual

Search results

Summary of Contents for 999-21100-009

Reviews:

Brands by name

Popular brands